• Who we are
• Products
• Service
• Shopping
• To contact us

• Tips & Tricks
• Quality Signs
• Quality LEDs
• Mounting
• Guarantee
• Upload file
• Custom Signs
• Accessories

We use several ways to mount the signs. For every sign the mounting is different because for every sign the connection is different, the stability is different and the wall to mount the signs to is different.

Different mounting methods were developed so the signs can be mounted as stable as possible with the least effort possible. The flat cut signs have the most easy mount due to an adhesive being used. The bigger Boxlight (LC) signs, on the other hand, need heavy duty mounting because of the architecture of the system.
 

Mounting Boxlight (LC) signs
The Boxlight(LC) signs are heavy and need a stable mounting because of the architecture of the system. These signs have a mounting back panel which you have to drill to the wall first.  Afterwards you connect the letters with an RVS electric tube. You put the wires through the tubes and connect the letters.  Close the sign at the back and everything is ready.
 

Mounting Compli-, Front-, Line- and Backlight signs
The Compli-, Front-, Line- and Backlight signs have a mounting-part which contains the electric system, the connection system and the mounting system.  Mounting the signs is easy: drill the holes, put the screws in the wall, put the electric wiring through the screws and click the signs onto the screws. The connection wire goes through the screws and will connect all the letters in the electric loop.  It is simple, easy and fast.

Another option is to put the electric wiring from each letter directly through the wall.

Mounting Flatsigns and Reliefsign
We deliver a standard mounting system using an adhesive and double sided tape to mount the sign against the wall so no holes nor damage to the wall.  In addition you can order a screwing mount with a mounting clicking system.