Complilight sign benefits

  • Your sign is solid and perfectly sealed and is therefore 100% dirt and waterproof on the inside
  • All electronic components are sealed in a cooling paste preventing corrosion of all electronic connections
  • No visible screws nor attachments on front or side
  • Your sign is designed to be mounted at ± 1 Inch (20mm) from the wall preventing water dripping
  • Easy to use power-line through the signs for solid power connection
  • Extremely low power consumption
  • The visible thin housing of the signs (10 mm, 0,4 Inch thickness)  guarantees maximum light sharpness and visibility from both short and long distances
  • You can choose out of 18 briliant colours
  • Failure of one LED will not impact the other LED’s

Complilight sign specifications

The Complilight sign consists of 2 sealed parts. The back plate with the LED’s, electronics and mounting system and the front plate which spreads the light. These parts are glued together with a water proof sealing.
 
The front is colored and brightly lit. The light comes out of the front of the sign as well as out of the side of the sign and as such also spreads out over the wall.  The latter results in a nice aura around the entire sign. You can choose from 18 colors for the front and 5 LED light colors.
 
With our unique mounting system you won't see any mounting screws or wall attachments.
 
Your Complilight sign is being powered by a 8 Volt DC transformer which can be connected to any normal 220/240 AC network.

Nice thin signs

For smaller letters you better use thin signs. We always use a simple basic rule. The thickness of a letter must be wider then the depth... So better use thin letters for thin fonts... You can also look here for more tips & Tricks. To get thin signs with the same visual effect as thick light signs we developed some special systems, like Complilight, Frontlight, Linelight and Backlight. 

Top Quality LEDs

We only use the best quality LEDs from Nichia. A lot of people by now know the most LEDs don't have 50.000 hours lifetime. Heat is an important factor in this process. The warmer a LED gets, the shorter the lifetime will be. We developed a way so the LED won't get warm. By this we already have charts with only 2% loss at 20.000 burning-hours. Sure we want to compare these figures with other lightsign companies...!