Backlight sign benefits

  • Your sign is solid and perfectly sealed and is therefore 100% dirt and waterproof on the inside
  • All electronic components are sealed in a cooling paste preventing corrosion of all electronic connections
  • No visible screws nor attachments on front or side
  • No light disturbance by the mounting parts
  • Your sign is designed to be mounted at ± 1 Inch (20mm) from the wall preventing water dripping
  • Easy to use power-line through the signs for solid power connection
  • Extremely low power consumption
  • The extra thin housing of the signs (12 mm, 1/2 Inch thickness) guarantees maximum sharpness and visibility from both short and long distances
  • You can choose out of 18 sign colours and 5 light colours
  • Failure of one LED will not impact the other LED’s

Backlight sign specifications

The Back-light sign consists of 2 sealed parts. The back plate with the mounting parts and the front part with LED’s and electronics which spreads the light out through the back. The front and side of the sign are non-translucent. These parts are glued together with a water proof sealing.
 
The front is colored during daytime but is non-translucent during nighttime.
The light comes out of the back and spreads out over the wall.  The latter results in a nice aura around the entire sign. You can choose from 18 colors for the front and 5 LED light colors.
 
With our unique mounting system you won't see any mounting screws or wall attachments.
 
Your Back-light sign is being powered by a 8 Volt DC transformer which can be connected to any normal 220/240 AC network.

Nice thin signs

For smaller letters you better use thin signs. We always use a simple basic rule. The thickness of a letter must be wider then the depth... So better use thin letters for thin fonts... You can also look here for more tips & Tricks. To get thin signs with the same visual effect as thick light signs we developed some special systems, like Complilight, Frontlight, Linelight and Backlight. 

Top Quality LEDs

We only use the best quality LEDs from Nichia. A lot of people by now know the most LEDs don't have 50.000 hours lifetime. Heat is an important factor in this process. The warmer a LED gets, the shorter the lifetime will be. We developed a way so the LED won't get warm. By this we already have charts with only 2% loss at 20.000 burning-hours. Sure we want to compare these figures with other lightsign companies...!